国产香蕉尹人综合在线观看

  • <table id="pkhc8"><ruby id="pkhc8"></ruby></table>

    <table id="pkhc8"></table>

    The RETINA? Lab Laser System

    RETINA?

    Lab Laser System

    The RETINA? Lab Laser System

    The Retina Lab Laser System is a fully integrated, compact system designed for Lab R&D use. The UV laser source means the system has an extremely long life-cycle and minimal maintenance costs. The system is maintenance free apart from the filter pad and processing lens.

    The combination of a high-quality galvo scanner and a UV laser produces highly precise marking results in short marking time. This, together with the LMS 3.1 marking software and the available interfaces, provides a flexible and productive marking solution of the highest quality standards.

    The FDA 21 CFR Class I safety enclosure is designed to meet strict FDA safety guidelines while being easy to use and nonobtrusive.

    Build & Quote Now

    FEATURES


    Safe Class I Enclosure

    Class I enclosure allows the operator to work without wearing the additional protective eye glasses and suit.

    And the design of the magnetic interlock will stop lasing as long as the door is opened.

    Powerful High Speed and Precious Lasing

    Taking advantage of the photon energy of the 355 nm wavelength (cold marking), the system is capable of achieving 3.9 μm spot sizes and work spaces in excess of 200 x 200 mm. The system can also achieve up to 10,000 mm/s scanning speed with high quality galvo scanner.

    Compact Design

    Your all-in-one solution, no separate controller unit and computer needed.

    Professional and user-friendly software

    The LMS 3.1 was developed to bring out the high performance of the in an easy to use interface. Even users with no experience in laser programming can easily begin operating very complex setups.

    SPECIFICATION


    LaserLaserPulsed UV Laser, Maintenance Free
    Wavelength355 nm
    Pulse Width30 ns
    Beam QualityM2 < 1.2
    Pulse to Pulse Stability< ± 10%
    Beam Circularity> 85%
    Beam Divergence Full Angle< 0.5 mrad
    Maximum Average Output Power3 W
    Maximum Pulse Energy100 μJ
    Pulse Repetition Rate10-50 kHz
    Cooling RequirementWater Cooling
    WorkstationOverall Dimensions (L × W × H)842 × 513 ×934 mm (33.2″ × 20.2″ × 36.8″)
    Dimension of Opening (W × H)686 × 518 mm (27.01″ × 20.39″)
    DoorManual
    Maximum Workpiece Size437 × 277 mm (17.20″ × 10.91″)
    Maximum Load25 kg (55.125 lbs.)
    Table SizeAluminum Table 710 × 412 mm (27.95″ × 16.22″)
    Z-axisManual Z-axis (Optional Automatic Door)
    Z-axis Travel Distance50 mm (1.97″), 150 mm (5.91″), 220 mm (8.66″)
    Galvo-SystemLens/Focal LengthF-60F-100F-167F-295F-330
    Marking Area [mm x mm]22 x 2250 x 5090 x 90172x 172203 x 203
    Spot Size~ 3.9 μm~ 5 μm~ 10.8 μm~ 13 μm~ 15.3 μm
    Scanning Speed10,000 mm/s (472.44 inches/s)
    ControlComputerIntel NUC 5i5MYBE, 8 GB RAM, HDD 200 GB, Windows? 10
    InterfaceUSB 3.0
    SoftwareLMS 3.1: Professional Laser Marking Software
    Installation/Laser SafetyWeight48 kg (105.84 lbs.) (without Chiller, Monitor, Keyboard and Mouse)
    Monitor: 3 kg (6.615 lbs.), Chiller: 23 kg (50.715 lbs.)
    Ambient ConditionsOperating Temperature Range +15 to +30°C (50 to 86°F)
    Relative Humidity Maximum 80%, Non-condensing
    Electrical Requirements100 – 230 VAC,1 Phase, 15A, 50/60 Hz
    Power Consumption< 600 W (Including Monitor and Chiller)
    System ProtectionMarking Head: Sealed against Spray Water (IP 54)
    Laser Unit: Dust Protected (IP20)
    Laser ClassLaser Class I

    APPLICATION


    HDPE Laser Marking

    Due to the short wavelength of UV laser, the RETINA system can marking on some high polymer material which other kinds of laser are not able to mark on, such as, HDPE.

    Micro Drilling

    With the advantage of short wavelength, the UV can get smaller spot size than other kinds of laser source.

    Micro Machining

    Cold UV machining minimizes the heat affected zone (HAZ), improving machining accuracy.

    PCB Cutting

    UV laser cutting not only eliminates the effects of mechanical stress that occur during cutting such as burring, deformation, and damage to circuit components, but also reduces the effects of thermal stress found with other laser options, such as CO2 cutting.

    Flexible Accessories Configuration


    Three Types of Skin

    Black ABS

    Silver Alucobest

    Clear Acrylic

    Three Types of Accessories

    Z-θ Table

    XYR Table

    Rotation Tip/Tilt Table

    Get an Online Quote

    Build and quote a system using our online quote builder

    Quote Now

    Machine/System Financing

    From startups to large business

    More Info

    Contact CLC

    Speak with a sales representative about a system

    Contact Us

    Free tests for your workpiece samples!

    Match your application with right machine configuration before you buy

    Contact Us (407) 926-3500 Price Match Online Order Guide
    国产香蕉尹人综合在线观看

  • <table id="pkhc8"><ruby id="pkhc8"></ruby></table>

    <table id="pkhc8"></table>